Published: 2026-11-05 | Category: Logistics Guide

Nanhai, Shunde and Sanshui in Foshan, China form one of the country's densest mattress export clusters. The product has an awkward profile: it is bulky cargo, but not ordinary bulky cargo — compress it harder and you fit more in the box, but compress it too much and the buyer complains about recovery.

This guide covers four operational questions: how to size the container, how to compress and pack, how to clear US flammability rules, and how to handle anti-dumping exposure — plus whether FCL ocean freight DDP fits your order structure.

First, decide which construction you are shipping

Different constructions behave completely differently in a container.

Type Construction Compressibility Units per 40HQ
Memory foam All foam, no springs Excellent; vacuum roll-pack 500–800
Innerspring Pocket coil or Bonnell plus fill Moderate; fold or lay flat 150–260
Hybrid Springs plus memory foam Limited; cannot be rolled 120–200
Coir / firm Coconut fibre, jute, 3D mesh Almost none 100–160

Rule of thumb: if it roll-packs, a 40HQ fills with product. If it does not, you are sizing on volume and a 40HQ takes far fewer pieces than the nominal count suggests.

Second, container sizing — volume first, weight second

Mattresses are light for their volume, so container choice is nearly always volume-driven. There are two exceptions.

Container Internal (approx.) Usable volume Fits
20GP 5.9 × 2.35 × 2.39 m ~28 CBM Trial orders, samples
40GP 12.0 × 2.35 × 2.39 m ~58 CBM Flat-packed innerspring
40HQ 12.0 × 2.35 × 2.69 m ~68 CBM Roll-packed memory foam; the extra 30 cm matters
45HQ 13.5 × 2.35 × 2.69 m ~78 CBM Large single-SKU runs

The two exceptions:

  1. Innerspring can go overweight. Springs plus high-density foam can reach 40–50 kg per piece, so a 20GP hits its weight limit before it fills. A 40HQ often works out cheaper per unit even though the box is bigger.
  2. Roll-packed goods expand on recovery. If the buyer wants "unpack and use", you cannot compress to the limit — allow roughly 1.1× the recovered volume when you calculate load count.

Third, packing — the real technical work

Half the value of a mattress is the material and half is the pack. Get the pack wrong and you are processing returns at destination.

Roll-packing

For memory foam:

  1. Vacuum compress — thickness drops to a third or a fifth of original
  2. Roll into a cylinder, typically 30–40 cm diameter
  3. Wrap in PE film plus woven bag, or box it
  4. Stack upright or horizontally with board separators

Timing matters: load within about 72 hours of compression. Compressed for a month, recovery rate drops and the buyer measures a thinner mattress than specified.

Flat or folded

For innerspring and hybrid:

  • Wrap each piece individually (PE film plus corner board)
  • Fold and strap so pieces cannot open in transit
  • Stand them on edge, not flat — typically 20–30% more per container
  • Leave a buffer at the door end so the row cannot topple when opened

Moisture control is not optional

Containers sweat crossing the Pacific. A damp mattress is a mould claim:

  • Desiccant sized to the container volume, not guessed
  • Moisture-barrier wrap, not plain PE film
  • A liner bag for shipments loaded in the rainy season

Fourth, US compliance — 16 CFR 1633 is the gate

Flammability is not negotiable for mattresses entering the US.

Rule What it tests Applies to
16 CFR 1632 Cigarette ignition All mattresses
16 CFR 1633 Open-flame test All mattresses; enforcement tightened after 2023
TB 117 / TB 117-2013 Filling material flammability (California) Anything sold in California
Law Label Statutory label declaring filling content All mattresses — mandatory

Practical points:

  • You need a third-party test report from a CPSC-recognised lab, not a factory self-declaration
  • The Law Label must be sewn in during production, not applied at destination — this is where many Chinese factories fail
  • Each SKU needs its own testing; one report does not cover a range
  • Declared filling percentages must match the goods; CBP and CPSC both sample

Fifth, anti-dumping — the real exposure

Mattresses are a priority category for US anti-dumping and countervailing action. Chinese-origin mattresses have been subject to AD/CVD proceedings more than once.

Three things you must do operationally:

  1. Confirm the current rate before you quote. AD/CVD rates change with administrative reviews — have your broker check the latest rate, do not reuse last year's number
  2. Confirm the country of origin. If some production happens in Vietnam or Cambodia, verify that the origin rules are actually met rather than relabelling
  3. State explicitly whether your DDP quote includes AD/CVD. This is the single most common dispute — plenty of "all-in" quotes exclude it and the buyer discovers the gap at the port

Under DDP the seller is the importer of record, so AD/CVD liability ultimately sits with the seller. Price the AD/CVD before you price the shipment, or one container can wipe out the year's margin.

Sixth, which port to load from

Foshan, China has no seaport, so cargo trucks to Guangzhou or Shenzhen, China. Mattress production concentrates in Nanhai and Shunde, closest to Nansha.

Route Drive time Best for
Foshan, China → Guangzhou Nansha 1–1.5 h First choice; dense USWC sailings
Foshan, China → Shekou / Yantian, Shenzhen, China 2–2.5 h USEC all-water, specific direct services
Foshan, China → barge ports (Sanshan, Shunde) 1–2 days by barge Large volumes, flexible sailing dates

Practical notes:

  • Roll-packed mattresses are bulky but light, so a 40HQ fills on volume well before weight — Nansha is fine
  • USEC orders (New York, Savannah) are steadier via Yantian direct
  • Nansha gates queue in peak season, and roll-packed goods must load within 72 hours — lock the pick-up slot early

Seventh, cost structure and what to ask

A DDP delivered price breaks into six blocks:

Cost block Contents
Origin Factory pick-up, drayage, export declaration
Ocean Freight, THC, documentation, peak season surcharge
Destination port Destination THC, ISF, clearance fee
Duty and tax Import duty, AD/CVD where applicable, MPF, HMF
Delivery Trucking, unloading, appointment fees
Contingent Exam fees, detention, storage

Four questions every mattress quote must answer:

  1. Is AD/CVD included, and at which year's rate
  2. Is Law Label production covered — some forwarders do it, some do not
  3. How are exam fees handled — at cost or fixed
  4. Does delivery include unloading — mattresses are bulky, and unloading is not free

Eighth, the common traps

Trap 1 — Over-compressing. A month under vacuum, and the recovery rate fails the buyer's inspection.

Trap 2 — Labelling at destination. CPSC finds a non-compliant label and the shipment goes back.

Trap 3 — AD/CVD left out of the quote. The most common way to lose money on mattress DDP.

Trap 4 — Ignoring container sweat. Moulded mattresses are a total loss, and insurance may decline it as a packing fault.

Trap 5 — Quoting to "the USA". Mattress delivery needs an appointment and unloading; inland states can cost double a port city.

When full-container DDP makes sense

  • 150 pieces or more per shipment — per-unit cost clearly beats LCL
  • The buyer is a US retailer, hotel group or apartment operator with no import capability
  • You want one delivered price with AD/CVD and certification handled

Small trial orders can go LCL, but for mattresses LCL damage rates are noticeably higher because of repeated handling — for higher-value goods, book the container. See the container guidance in our FAQ for the crossover point.


In short: the ocean leg is the last and easiest part of exporting mattresses. What decides whether the shipment makes money is compression packing, 16 CFR 1633 compliance, and whether AD/CVD is inside the quoted price.

Send us the mattress type, dimensions and weight per piece, packing method and US delivery address and we will return an itemised quote within 24 hours.

Questions about this shipment?Email our logistics team: alan@hssddp.com