Published: 2026-11-18 | Category: Logistics Guide

Furniture is one of the Pearl River Delta's biggest export categories to the United States, and one of the easiest to damage in transit. The cartons are large, the walls are soft, the corners are fragile, and the value is not trivial.

The same 40HQ can carry 60 CBM on a good load plan and 50 CBM on a bad one, and the damage rate moves with it. This is how furniture actually gets packed.

1. Fill rate is the profit margin

Furniture pays by the cubic metre. A 40HQ offers 65 to 68 CBM, and 55 CBM is the pass mark.

Furniture type Carton profile Achievable load
Board furniture (cabinets, tables) Regular, stacks well Over 60 CBM
Upholstered (sofas, mattresses) Bulky, irregular 48 to 55 CBM

The most common error with upholstered goods is the packing list: if it is built from nominal rather than actual carton dimensions, the fill rate is badly underestimated and both the quote and the load plan drift.

Produce a container loading plan from real carton dimensions before shipment. It is the cheapest hour of the whole job.

2. Container choice: 40HQ by default

For furniture alone, the 40HQ is the standard choice.

Where hardware comes with it, such as steel bed frames or sofa legs, the weight climbs. Check whether the container is approaching its payload limit and split part of the order into a 20GP if it is.

Long items such as dining tables or full-height cabinets need their orientation checked against the internal length, and the leftover space assessed for other cargo.

The order of decisions: volume decides the box, weight confirms it is legal, and long pieces decide the geometry.

3. Packing and securing drive the damage rate

Furniture damage comes from three sources, each with its own fix.

Damage source Countermeasure
Corner impact Corner protectors and foam edging; timber or cardboard frames on sofas
Crush from stacking Five-ply corrugated cartons; air bags and dividers to fill void space
Moisture and warping Desiccant in the container, pallets raised off the floor, moisture treatment on timber goods

Leave a buffer layer at the door end. It is the most overlooked position in the box and the first place to shift when the doors open.

A month at sea makes humidity a real risk, so do not cut the moisture work.

4. US delivery: furniture goes residential

A high share of furniture consignees are residential addresses, which brings two charges: residential delivery and appointment fees.

Sofas, mattresses and full-height cabinets are large enough to need a liftgate, and sometimes a two-person delivery team. Confirm all of this at booking, not on arrival.

Where the consignee is an e-commerce or distribution warehouse, confirm the inbound requirements: pallet specification, label format and appointment system.

5. Cost structure

Furniture pays five blocks on the way to the door.

Block Contains Furniture-specific behaviour
Origin Trucking, export declaration, terminal, THC Same as general cargo
Ocean Priced by container and lane Light cargo, so a 40HQ spreads it best
Destination Destination charges, ISF Same as general cargo
Duty Classified by product type Wood, metal and upholstered furniture sit under different codes and rates
Delivery Final-mile trucking A high share, given volume, residential addresses and liftgates

Duty has to be classified by product line. Get the declared elements wrong and the classification, and therefore the rate, follows. See DDP shipping for how duty is handled end to end.

6. FAQ

How much fits in a 40HQ? 55 to 62 CBM for board furniture and 48 to 55 CBM for upholstered goods, depending on packaging and the load plan.

Can sofas and mattresses be mixed? Yes, but watch weight distribution and stacking order. Mattresses should not sit on sofa frames.

What does the US require for wooden furniture? Wood packaging material normally has to meet international wood packaging treatment rules, and solid timber components may involve a material declaration. Confirm before shipping.

How long does it take? 30 to 35 days to the West Coast and 40 to 45 days to the East Coast, counted from the loading date.

What if something arrives damaged? Photograph at loading, record on the delivery receipt at arrival, and settle under the contract terms. Cargo insurance covers this class of loss.

7. About us

Harmony Shipping Service Limited (HSS) is a Dongguan-based FCL shipping from China to USA forwarder holding NVOCC registration MOC-NV03089. We handle furniture DDP from Guangdong to Los Angeles, covering load planning, packing advice, US customs clearance and delivery, with residential and liftgate requirements priced in up front.


Send the carton count, carton dimensions and delivery address and we will produce a load plan before quoting.

Questions about this shipment?Email our logistics team: alan@hssddp.com